Environmental & Scientific Instruments Co.
Environmental & Scientific Instruments Co.


Contact Us

Plot – 123, Industrial Area, Phase – II, Industrial Area Phase 2, Panchkula, Haryana - 134113, India

Mobile : +91-9216626616

Phone : +91-172-5033251

Fax : +91-172-2591407

Microprocessor Flame Photometer-1382 & 1385

Microprocessor Flame Photometer, Model-1382 is an ideal instrument for the determination of sodium, Potassium, Calcium and Lithium. It uses the latest Microcontroller technology and advanced engineering techniques so as to give enhanced and reproducibility. It has soft touch membrane key for ease of operations. the solution is aspirated through an automiser, Air sample and the fuel are mixed in the mixing chamber which is then sprayed as a very fine mist into the flame. The color of the flame is changed depending upon the concentration of elements present. Radiations from the flame passes through the sensing system and specific narrow band interference filter which permits only the characteristic radiation to pass to the photo-detector. The output of the photo-detector is then processed by the microcontroller and the final results are displayed on the digital display. The System has 5-Point calibration facility and no linearity correction is provided through an automatic curve fitting software. Facility has been provided for re-standardization with a single standard, thereby, eliminating the need of the multiple standards once a calibration has been performed.


  • Microprocessor Based with Printer Interface
  • Auto Gas Cutoff (Model - 1385)
  • Auto Flame Failure Detection (Model - 1385)
  • Four Measurements in Single Aspiration
  • Setup Storage Facility
  • Sample Data Storage Facility
  • Curve Calibration Programmability Using Maximum of 5 Standards
  • Multiple Calibration Curve Saving Facility
  • Data Processing Through Curve Fitting
  • Techniques, Least Square, Quadratic
  • Online Help Key
  • Direct Results in ppm and meq
  • Useful for Medical & Soil Testing


Gas Control Adjustable With Knob
Display 20 X 4 Line Alphanumeric Backlit Display
Flame System LPG and dry oil free air
Ignition System Auto ignition
Automiser Axial flow type
Printer Provision for attachment of dot matrix printer or HP laserjet/ inkjet (non-windows) printers with centronics parallel interface
RS-232C Available (PC software at extra cost)
Power 230 V ± 10% AC, 50 Hz


Mode General Serum Urine
Range Na: 0.1-100 ppmUpto 250 meq/l, 1:100 dilK: 0.1-100 ppmUpto 250 meq/l, 1:100 dilCa: 15-100 ppmUpto 250 meq/l, 1:100 dilLi: 0.5-100 ppmUpto 250 meq/l, 1:100 dil Na: 0-2001:100 dilK: 0-101:100 dilCa: - Li: 0-21:5 dil Na: 0-2501:100 dilK: 0-1001:100 dilCa: - Li: 0-101:2 dil
Sensitivity General Mode: Na:0.5 ppm, K:0.5 ppm, Li:0.5 ppm, Ca:15 ppm
Filters Na & K Supplied (Ca & Li are optional at extra cost)
Resolution 0.1 ppm/meq
Reproducibility + 2% FS, &± 2 Digits
Curve Fit Accuracy + 2% FS
Display 20 x 4 Alphanumeric backlit LCD display
Average Time In-built in Software
Flame System LPG & dry oil free air
Detector Silicon Photodiode
Calibration Upto 5-Point Calibration with curve fitting software
Gas Control Adjustable with knobs
Ignition System Auto Ignition
Automiser Axial flow type
Printer Provision for attachment of Dot-Matrix Printer of HP Laserjet/Inkjet Printer (non-win printers) with centronics parallel interface
RS-232C Interface Available (PC Software at extra cost)
Power 230 V + 10% AC, 50 Hz
Dimensions 365 x 245 x 220 mm (L x B x H) (Approx.)
Weight Main Unit : 7.5 Kg. (Approx.)
Compressor Unit
Air Supply By oil free mini compressor unit with pressure regulator
Combustion Gas LPG Controlled by precision regulator
Power 230 V + 10% AC, 50 Hz
Dimensions 290 x 255 x 210 mm (L x B x H) (Approx.)
Weight 8 Kg (Approx.)