Environmental & Scientific Instruments Co.
Environmental & Scientific Instruments Co.


Contact Us

Plot – 123, Industrial Area, Phase – II, Industrial Area Phase 2, Panchkula, Haryana - 134113, India

Mobile : +91-9216626616

Phone : +91-172-5033251

Fax : +91-172-2591407

Microprocessor pH System-1010

Microprocessor pH System-1010 is a solid state instrument designed to provide the precise pH, mV and temperature measurements. It has auto buffer recognition for 4.00, 7.00 and 9.2 pH buffers and auto 2 or 3 points buffer calibration. It has 7 segment bright red LED display. The instrument uses the latest microprocessor technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility. The system has 6 soft touch membrane type keys for ease of operation. The calibration is retained even after the instrument is switched OFF

The instrument is extremely useful for agricultural and soil analysis laboratories, swimming pools, water quality control in boiler feed water, water works department, fertilizer plants, petroleum refineries, breweries, water purification plants etc.


  • Measure pH, mV & Temperature
  • Highly Accurate & Easy to Operate
  • Auto Temperature Compensation Facility
  • 7 Segment Bright Red LED Display
  • Soft touch membrane keys


Type Ph Meter
Warranty 1Year
Power Supply 12V DC, using 230V ± 10% AC Adapter
Temperature Compensation 0 to 100 degree C Auto/Manual
pH Range -2 to 20.00 pH
Type of PH Meter Portable
Calibration Auto (2 or 3 point)
Display 7-Segment Bright Red LED display (3 for Temperature and 4 for pH/mV)
Key Board 6 Keys, Soft Touch Membrane Type

Additional Information

Product Code 1010


Parameter pH, mV and Temperature
Readout 7-Segment bright Red LED display
(3 for Temperature and 4 for pH/mV)
Key Board 6 keys, soft touch membrane type
Power supply 12V DC, using 230V+ 10% AC Adapter
PARAMETERS pH mV Temperature
Range -2 to 20.00 pH 0 to + 1999 5 to 110oC
Resolution 0.01 pH 1 mV 0.1oC
Accuracy + 0.01 + 1 Digit + 1 mV, + 1 Digit + 0.1oC
Relative stability 0.02 pH/Hour
Acceptable Electrode Slope 80% to 120%
-5 to 110oC Auto/Manual
Temperature Sensor Semi-Conductor
Calibration Auto (2 or 3 point)
Auto Buffer Recognition 4.00,7.00 & 9.20 pH
Accessories Combined pH Electrode, Temperature Probe, Dust Cover, InstructionManual, Electrode Stand Buffer Tablets 4 & 7 pH & Main Lead
Note : Specifications are subject to change due to continuous improvements.