Industrial Area Phase 2, Panchkula, Haryana
Environmental & Scientific Instruments Co. is reckoned as an important manufacturer, supplier and exporter of hi-tech instruments used in the pharmaceutical industries, institutions and research laboratories.
Environmental & Scientific Instruments Co. has various models of Melting Point Apparatus to suit the need of different customers. The Melting point apparatus is designed to determine the melting points with high accuracy, and is supplied with a silicon oil bath with heater for heating the bath. The unit has an arrangement to hold the capillary containing the sample in uniformly heating media.
Environmental & Scientific Instruments Co. is also counted among the leading manufacturer and supplier of other instruments like Double Beam UV-VIS Spectrophotometers, UV-VIS Spectrophotometers, Visible Spectrophotometers, Fluorometer, Dissolution Apparatus, Disintegration Apparatus, Friability Apparatus, Melting Point Apparatus, Bulk Density Apparatus, Tap Density Apparatus, pH Meters, Conductivity Meters, TDS Meters, Dissolved Oxygen Meter, Turbidity Meters, Nephelometers etc. from India.
Business Type | Manufacturer, Exporter, Supplier |
Preferred Buyer From
Location | Worldwide |
Auto Melting Point Apparatus is specially designed to find the melting point temperature of crystalline sample held within capillary tubes. Instrument uses the latest microcontroller technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility. The system is equipped with microcontroller based digital display for displaying accurate results and soft touch membrane type keys for ease of operation.
The sample capillary to be analyzed is held in an heating block (i.e. aluminium block) inside the heating chamber. The block holding the sample capillary tube is heated and the temperature is displayed on the 4 digit seven segment red LED display.
The plateau temperature and the heating ramp rates are fully programmable using ‘Plateau’/ ‘Ramp’ keys along with the ‘Up’, ‘Down’ keys. The plateau temperature allows the user to set a temperature to few degrees below the expected melting point temperature. Auto melting point apparatus will then heat to the programmed plateau temperature very rapidly. Once plateau temperature is reached the instrument will heat slowly from the plateau temperature until the melt occurs on programmed ramp rate.
The end point of the measurement cycle (i.e. final melting point temperature) is indicated with ‘END’ led along with the intermittent audible beep. ‘Run’ LED indicates that the instrument is in measurement cycle.
User can store upto 100 results (i.e. melting point temperatures) using the ‘Store/Recall’ key which are retained in the instruments memory even when it is switched off. If by chance the sample capillary is broken inside the heating chamber, then user can flush the broken capillary using the ‘Normal’/’Clean’ rotary switch provided at the right side of the instrument.
Features
Business Type | Manufacturer, Exporter, Supplier |
Preferred Buyer From
Location | Worldwide |
Melting Point Apparatus with TFT display & 4 digit LED display is designed for accurate measurement of melting points and for checking the melting range of the solid samples. The apparatus consists of a silicon oil-bath of about 200 ml capacity, covered with a teflon cover with 5 holes, fitted with a special type of oil immersion heater and having three holes for holding the capillaries, one for boiling point tube and one for the thermometer. It is supplied with high resolution camera & TFT display screen to view sample in capillaries.
The apparatus consists of an in-built magnetic stirrer, an electronic controller with indicator for precisely adjusting the rate of heating of silicon oil-bath, an ON/OFF switch, a pilot lamp, a magnifier, glare free background illuminator and a High/Low range temperature selector switch and digital temperature indicator with PT-100 RTD sensor.
The ‘Start’ switch is used to start the measurement of melting point. User can stop the process of measurement using ‘Stop’ switch after the instrument reaches the melting point of the sample. The display will always show the last temperature where ‘Stop’ switch was pressed in last measurement. Clear switch is used to clear the display to zero.
FEATURES
Business Type | Manufacturer, Exporter, Supplier |
Preferred Buyer From
Location | Worldwide |
Microcontroller Visual Melting Point Apparatus Model 3935 with Graphical LCD display and colored TFT screen and high resolution camera. It is designed for accurate measurement of melting points and for checking the melting range of the solid samples. The apparatus consists of a silicon oil bath of about 200 ml capacity, covered with a Teflon cover with 5 holes, fitted with a special type of oil immersion heater and having three holes for holding the capillaries, one for boiling point tube and one for the thermometer.
The plateau temperature and the heating ramp rates are fully programmable using ‘Plateau’/ ‘Ramp’. The plateau temperature allows the user to set a temperature to few degrees below the expected melting point temperature. Auto melting point apparatus will then heat to the programmed plateau temperature very rapidly. Once plateau temperature is reached the instrument will heat slowly from the plateau temperature until the powder melts on programmed ramp rate.
A high resolution camera detects the sample status. This makes it a user friendly instrument.
FEATURES
Business Type | Manufacturer, Exporter, Supplier |
Preferred Buyer From
Location | Worldwide |
Melting Point Apparatus – 931 is designed for accurate measurement of melting points and for checking the melting range of the solid samples. The apparatus consists of silicon bath of about 200 ml capacity, covered with teflon cover, fitted with a special type of oil immersion heater having three holes for holding the capillaries, one for boiling point tube and one for thermometer. The apparatus consists of in-built magnetic stirrer, with indicator for precisely adjusting the rate of heating of silicon oil-bath, an On/Off switch, a pilot lamp, with magnifier, a thermometer, a glare free background illuminator and a high/low range temperature selector switch.
Features
Business Type | Manufacturer, Exporter, Supplier |
Preferred Buyer From
Location | Worldwide |
Melting Point Apparatus with 4 digit, 7-Segment LED display is designed for accurate measurement of melting points and for checking the melting range of the solid samples. The apparatus consists of a silicon bath of about 200 ml capacity, covered with teflon cover with 3 holes fitted, with a special type of oil immersion heater having three holes for holding the capillaries, one for boiling point tube and one for the thermometer. The apparatus consists of in-built magnetic stirrer, an electronic controller with indicator for precisely adjusting the rate of heating of silicon oil-bath, an ON/OFF switch, a pilot lamp, with magnifier, a glare free background illuminator, a High/Low range temperature selector switch and digital temperature indicator with PT100 RTD sensor
The ‘Start’ switch is used to start the measurement of melting point. User can sto the measurement using the ‘Stop’ switch after the instrument reaches the melting point of the sample. The display will always show the last temperature where ‘Stop’ switch pressed in the last measurement. Clear switch is used to clear the display to zero.
FEATURES
Hi! Simply click below and type your query.
Our experts will reply you very soon.