Pharmaceutical Instruments

Features

• 14 Station (Model – 2914)
• 12 Station (Model – 2912)
• Complies with USP, IP specifications
• Extremely useful for pharmaceutical labs
• Programmable stirrer control (25 to 300 RPM)
• 20 x 4 line alphanumeric LCD display with backlit
• 19 Soft touch membrane type keys
• 20 independent programmable setups for routine & sustain mode with storage
• 200 sample storage facility
• Printer attachment facility
• Audio visual indicators for system status
• Easy to empty and clean water bath with bottom drainage
• Continuation of last sample run in case of power failure

Disintegration Tester is a solid state instrument designed for the accurate estimation of disintegration time of tablets as per IP/USP standards. The instrument is designed to test two batches of six tablets, simultaneously. The unit is extremely useful for pharmaceutical industries. It is used in quality control and R & D to determine compliance with the disintegration requirement of the tablet and capsule as per USP/BP/IP standards.

Instrument uses the latest microprocessor technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility. The system has user friendly prompts, which guide you throughout the measurement process.

The instrument has two basket assemblies with independent timers and motors. The timers and temperature are displayed on 5 digit and 3 digit seven segment red LED displays respectively. Each timer can be set and used individually. The baskets are automatically positioned at the top when the test is over.

The unit is provided with two glass beakers having capacity of 1000 ml with arrangement to hold temperature sensor placed in the sturdy, acrylic water bath. The large spread out stainless steel heater ensures perfectly uniform heating. The instrument has a dual channel temperature system with sensors to monitor the test temperature of disintegration beaker as well as water bath. The temperature of the water bath and vessels are accurately maintained using highly accurate sensors and microcontroller technology. The basket speed is accurately controlled and maintained as per IP, USP specifications.

Features

• Complies with USP, IP specifications
• Extremely useful for pharmaceutical labs
• Microprocessor based, easy to use
• Seven segment LED display
• 10 Soft touch membrane type keys
• User friendly operation with current status indicators
• Supports Two USP baskets assemblies.
• Each basket is controlled by independent Timer and Motor
• Programmable temperature controller
• Auto parking of the basket at the top position at the end of the  test
• External probe for beaker temperature validation

Microprocessor Tap Density Tester, Model 1951 is a density measurement equipment used to measure tapped density of powders, as well as granulated or flaked materials by standardized and repeatable procedures. Instrument uses the latest microprocessor technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility.

System is equipped with 4 line alphanumeric LCD display with backlit and 16 number of soft touch membrane type keys.

The unit is provided with two motorized platforms which allow for 14 ± 2.0 mm drop height for the USP Method I version, and a 3 ± 0.2 mm drop height for the USP Method II version. The motorized platforms consist of two cylinder holders with snap-lock mechanism designed to hold 100 ml and 250 ml cylinders. The simultaneous rotating and tapping motion minimizes any possible loss of mass during tapping down.

The instrument stores the test parameters, readings and results simultaneously in the memory which are retained even after the power is switched OFF. Provision has also been made for attachment of a printer so as to provide hard-copy printouts of test data, including the time, date and calculated results.

Features

• Complies with USP, IP specifications
• Extremely useful for pharmaceutical labs
• Microprocessor based, easy to use
• 20 x 4 line alphanumeric LCD display with backlit
• 16 Soft touch membrane type keys
• Independent programmable setups for User & USP mode with storage
• Rs232 Printer attachment facility
• Automatically calculate result parameters like Tap Density, Initial Density, Compressibility Index and Hausner Ratio
• Automatically stores last Result
• Power Failure detection facility
• User friendly operation with menus & current status indicators.

Microprocessor KF Moisture Titrator – 2760 is the finest volumetric titrator available. It uses the latest microcontroller technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility. The system has user friendly prompts which guide you throughout the titration process. This titrator eliminates the use of conventional delicate and fragile glass burettes and plunger systems. It uses a highly sensitive motorized dispensing system for precise control of titrant volumes. This titrator analyses the moisture concentration of liquid samples, powder, fine particles and fiber samples that are soluble in alcohol or solvents. The moisture content is displayed in ppm, %age and mg H O.

The system has 20 soft touch membrane type keys for ease of operation. Complete alphanumeric keypad is provided so as to feed the values of sample, density, titer factor, date, time etc. The End Point indication is given by both visual LED and audible alarm. The titrator has the facility for automatically calculating the titer factor of the Karl Fischer reagent. It uses the repeated averaging method so as to give the most accurate titer value. It can store 90 user defined setup files for ease of operation and final results of 300 titration . The internal battery backup provision has been made to store the results and the other titration parameters even if the instrument is switched OFF. Provision for external printer/PC attachment is available so that any of the stored results or the calibration and validation reports as per pharma compliance can be printed even at a later stage.

Features

• Auto Computation of Moisture in ppm, % & mg HO.
• Storage of Date, Time, Batch No. and Final Results
• Dynamic Motorized Dispensing for more Accurate and Faster Operation
• Online Printing of Data
• Printing of Condensed, Statistical and Detailed Reports
• 2 Tier Password Protection Facility (Admin & User)
• Calibration and Validation Reports as per Pharma compliance
• User Defined Setup Files for Ease of Operation

Leak Test Apparatus is a solid state instrument designed for the leakage testing of food, drug and other industrial chemical products. The instrument is used to test the quality of packing processes in strips, blisters and sachets containing tablets, granulates and liquids. They are also used to check that the seals enclosing the product are perfectly intact.

The unit contains a polycarbonate desiccator housing to sustain the vacuum for long time. A compact vacuum pump for creating high vacuum level in short time period is used.

Test samples to be analyzed are placed into the polycarbonate desiccator housing. A vacuum pump generates vacuum inside the desiccator. The vacuum generated is held for a pre-set time, and then released. The test samples being analyzed should retain their shape during this test, indicating the sealing is correct. Secondly the strip/bottles under test are immersed in a colored dye solution (normally Methylene Blue). The venting of the desiccators will allow any holes to be penetrated by the dye and the contents of the flexible packaging will also be stained with the same coloring material.

Features

• Extremely Useful for Packing Industry
• Ideal for Leak Testing of Strips, Blisters & Sachets
• Microprocessor Based, Easy to Use
• 20 x 4 Line Alphanumeric LCD with Backlit
• Soft Touch Alphanumeric Mobile Keypad
• Programmable Vacuum & Hold Time
• Selectable Pressure Units
• 5 Setup Storage Facility
• Last Result Storage Automatically
• Printer Attachment Facility
• Supplied in SS body

Features

• Compatibility
• Real Time Data Transfer
• Unit Selection & Conversion
• Parameter Measurements
• Sequence Indicators
• Display
• Results Storage

Microprocessor Friability Apparatus, Model 1902 measures the tendency of a tablet to chip or breakdown to pieces when held under mechanical stresses. Instrument uses the latest microcontroller technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility.

System is equipped with 4 line alphanumeric LCD display with backlit and 16 number of soft touch membrane type keys.

The friability tester can be operated using only one or two drums. The rotational speed of drums can be set at different speeds (20-60 RPM). The samples can be loaded conveniently without removing the drums and after the test completion the samples are automatically unloaded to the collection tray.

To eliminate the manual input of weight of samples the facility of connecting a weighing scale is also available. When weighing scale is connected the weight of samples is automatically recorded to the instrument from the weighing balance.

The test can be performed in two different modes Time or Count mode. The instrument stores the test parameters, readings and results simultaneously in the memory which are retained even after the power is switched OFF. Provision has also been made for attachment of a printer so as to provide hard-copy printouts of test data, including the time, date and calculated results.

Features

• Complies with USP, IP specifications
• Microprocessor based, easy to use
• 20 x 4 line alphanumeric LCD display with backlit
• 16 Soft touch membrane type keys
• Independent programmable setups for Time & Count mode with storage
• Password-protected user access
• Facility to attach with weighing balance
• Rs232 Printer attachment facility
• Automatically calculates percentage friability
• Loading and unloading of tablets without removing drums
• Power Failure detection facility
• User friendly operation with menus & current status indicators.

Microcontroller Visual Melting Point Apparatus Model 3935 with Graphical LCD display and colored TFT screen and high resolution camera. It is designed for accurate measurement of melting points and for checking the melting range of the solid samples. The apparatus consists of a silicon oil bath of about 200 ml capacity, covered with a Teflon cover with 5 holes, fitted with a special type of oil immersion heater and having three holes for holding the capillaries, one for boiling point tube and one for the thermometer.

The plateau temperature and the heating ramp rates are fully programmable using ‘Plateau’/ ‘Ramp’. The plateau temperature allows the user to set a temperature to few degrees below the expected melting point temperature. Auto melting point apparatus will then heat to the programmed plateau temperature very rapidly. Once plateau temperature is reached the instrument will heat slowly from the plateau temperature until the powder melts on programmed ramp rate.

A high resolution camera detects the sample status. This makes it a user friendly instrument.

FEATURES

• Graphical LCD display, colored TFT screen with high resolution Camera
• Extremely Useful for Pharmaceutical Industry
• Highly Accurate and Easy to Operate
• Digital Resolution for Temperature 0.1°C
• Silicon Oil-Bath and In-built Magnetic Stirrer for Uniform Heating
• 3 Tire Password Protection Facility (Admin, Supervisor and User)
• Online/Offline Printing facility with real time and date
• User selectable Ramp Rate and Plateau Rate
• Facility for unknown/new product evaluation by Rapid Melt Method
• Up to 5 Point Temperature Calibration using Point to Point or Polynomial Method
• Validation Available as per Pharma Compliance

Electromagnetic sieve shaker 918 control is used in research & development, quality control of raw materials, interim and finished products as well as in production monitoring. The controllable electromagnetic drive offers an optimal adaption for every product. Sharp fractions are obtained even after short sieving times.

These Sieve Shakers are activated by electromagnetic impulses, they are recommended to perform sieving tests where high precision and performance are important, and where continual and intense uses are required.

It is particularly designed for test sieves with a diameter of 200 mm x 50mm h. They are therefore suggested for accurate sieving tests, also on fine materials. These Electromagnetic Shakers are of simple and sturdy construction, can hold up to 8 sieves .

Features

• Intermittent & Continuous Shifting Motion
• 20×4 Alphanumeric LCD with Backlit Display
• 2 Tier Password Protection
• Fully Alphanumeric Keyboard
• Very Low Noise Operation
• Up to 8 Sieves (Test sieve Dia 200mm x 50mm h)

EI Digital Antibiotic Zone Reader provides the user, distance in mm with accurate and fast method for determining the strength of antibiotic material. It functions by measuring the diameter from 0 to 80.0 mm of an inhibition zone in a petri-dish.

Wells are created on a petri-dish, prepared with agar – agar solution and inoculated with bacteria. After incubation, the bacterial growth cover the dish except for a circular inhibited zone around each disc, it being a function of the strength of the antibiotic.

The zone reader accurately measures the diameter of the inhibited zone to 0.1 mm within range of 0 to 80.0 mm diameter. Light is passed through the transparent and semitransparent portions of the agar from a source at base towards up. It then passed to a reflecting mirror supported by an arm above the unit, which reflects the light to glass prism mounted at the front of the unit and magnified image of the zone of inhibition is clearly visible on the prism.

Features

• Accurate method for determining the strength of antibiotic materials.
• Electronic ‘zero’ adjustment eliminate tedious zero setting on the scale.
• LED illumination for better visibility of zone.
• Fine focus adjustment for clear image on the viewing Glass.
• IQ /OQ Documentation.
• No effect of ambient light on image.
• No parallax so no human error in reading.
• Wide range of measuring diameters from 0 to 80.0 mm.

Features

• Full color, touch screen display
• Accurate and reliable operation
• Direct readout of all measurement parameters ( Viscosity, Temperature, % Torque, Spindle/Speed)
• Auto Range Showing
• Time Function for measurement
• Sound alarm at under 20% Torque
• Linear calibration

Digital Photo Fluorometer Model 681 is designed for precise analysis of fluorophors such as vitamins, quinine, steroids, fluorescein, metal complexes, etc. The Fluorescence is caused by the absorption of radiant energy and the re-emission of some of its energy in the form of light. In fluorescence, the excited molecule returns to the ground state immediately after excitation, when the fluorescent molecule is excited at the fixed wavelength (primary filter). The amount of light emitted is measured at the particular wavelength (secondary filter). Fluorometer method for the determination of fluorophors is more sensitive than the Colorimetric method.

The Primary Filters – Corning 5840 & Corning 5113 and secondary filters – Corning 4308, Corning 3486 and Corning 3385 mounted on holders are supplied with the instrument The fluorescence is collected at 90 degree angle to minimize the interference of excitation source to fall on the sample solution only during a measurement.

Features

• 3 Digit LED display
• Covers entire visible range
• Determines the concentration of Flurophors & Quinine

Digital Tele-Thermometer – Model 461 is an ideal, low cost, accurate and easy to operate instrument useful for pyrogen testing in pharmaceutical industries. The instrument has 6 channels so that temperature of 6 different rabbits can be monitored simultaneously. Special temperature probes are provided which can be easily inserted in the anus of the rabbits. Any of the 6 channels can be selected by a rotary switch provided on the front panel.

Features

• Extremely useful for Pharmaceutical Labs
• Highly Accurate and Easy to Operate
• 3½ Digit 7-Segment Display
• Six Temperature Probes